RFX Motorcycle circuit breaker Honda Race Series CRF 250 X (ME11)

The RFX Race Series kill switches are OEM replacement parts.

Complete with the same connectors, fixings, and cable lengths as the original part.

Available for a wide range of motorcycles.

Features:

• OEM replacement
• Accepts all original connectors
• OEM cable length

Installation instructions:

• Start by removing the front plate.
• Carefully cut the cable ties that hold the starting and stopping switch cables on the handlebars, then unscrew the clamps and let them hang.
• Locate the switch connector on the motorcycle; it’s often near the steering column on the frame but can sometimes be found under the tank.
• Detach the connector and remove the switch, noting the wiring path.
• Clean the connector with electrical contact cleaner.
• Lightly attach the new switch to the handlebars in the desired position.
• Route the wires as with the old switch and assemble the connector.
• Check that the wires aren't tight by turning the handlebars fully, adjusting if necessary.
• Reinstall the cable ties if possible by positioning the cables at the back of the handlebars to prevent damage from debris.
• Replace your front plate.

Specifications:

• weight (g): 49
• width (mm): 103
• height (mm): 30
• length (mm): 122
• volume (cm³): 377