RFX Motorcycle circuit breaker Honda Race Series CRF 450 R (PE05)

The RFX Race Series kill switches are OEM replacement parts.

Complete with the same fittings, fasteners, connectors, and cable lengths as the original part.

Available for a wide variety of motorcycles.

Features:

• OEM replacement
• Accepts all original connectors
• OEM cable length

Installation instructions:

• Start by removing the front panel.
• Carefully cut the cable ties holding the start and stop switch cables on the handlebars, then unscrew the clamps and let them hang.
• Locate the switch connector on the motorcycle, it is often near the steering column on the chassis but may sometimes be under the tank.
• Detach the connector and remove the switch while noting the wiring path.
• Clean the connector with an electrical contact cleaner.
• Lightly attach the new switch to the handlebars in the desired position.
• Route the wires as for the old switch and assemble the connector.
• Check that the wires are not taut by turning the handlebars to full extension, adjust if necessary.
• Reinstall the cable ties if possible by positioning the cables behind the handlebars to avoid damage from debris.
• Replace your front panel.

Specifications:

• weight (g): 60
• width (mm): 100
• height (mm): 30
• length (mm): 218
• volume (cm³): 654